How to apply decals & windshield banners

1. Prepare a spray bottle with a mixture of water & 1-2 small drops of liquid soap (amount depends on bottle size). Close bottle & shake the bottle well to make sure it it mixed properly.
2. Clean surface area with alcohol & a clean lint-free rag, or with alcohol wipes/lens cleaning wipes.
3. Use electrical tape or masking tape to stick to one side of the banner. Align banner. Once you have aligned your banner, stick the electrical/masking tape to the windshield to hold the banner from that one side.
4.  Slowly, peel the white backing off starting from the side you tapped to the windshield. Make sure the banner sticks to the clear tape! Sometimes the banner stays stuck onto the white backing. If this happens, press the clear tape onto the decal to get it to stick to the clear tape. You may have to use your nail to pick up the banner & have it stick to the clear tape. Toss white backing to the side.
5. Make sure the banner is aligned properly, then starting from the side you tapped to the windshield, press out the water mixture. Use a squeegee, or plastic card, to press out the mixture & any air bubbles. Use your finger to press onto the banner for a better stick to the surface.
6. Once there is no more water mixture under the banner, slowly peel off the clear tape & you're done! You may need to keep pressing out bubbles if the previous step was not done properly.

How to apply decals:

1. Clean surface area with alcohol & a clean lint-free rag, or with alcohol wipes/lens cleaning wipes.
2.  Slowly, peel the clear transfer tape away from the white backing. Make sure the decal sticks to/comes off with the clear tape! Sometimes the decal stays stuck onto the white backing. If this happens, press the clear tape onto the decal to get it to stick to the clear tape. You may have to use your nail to pick up the decal & have it stick to the clear tape. Toss the white backing aside.
3. Apply onto surface from either the middle, pressing outward, or from one side pressing to the other. Use a squeegee, or plastic card, to press out any air bubbles. Use your finger to press onto the decal for a better stick to the surface.
4. Slowly peel off clear tape & you're done!